Wiring Connectors and Rear Brake Line

My order of Weather Pack connectors showed up, so I installed the remaining ones that were missing. For the headlights, I also fabricated short jumper cables to the plug that attaches to the back of the bulb. When I switch to LED bulbs, they might have a different connector on the back, so it will be trivial to fabricate a different jumper if necessary.

I also got started on the rear brake line. This line runs from the forward side of the pilot’s footbox,¬†along the upper 3/4″ tubing to the x-frame and down to the main 4″ chassis tubing. There will be a union there to the piece of tubing that runs the rest of the way to the rear tee.

Leave a Reply

Your email address will not be published. Required fields are marked *