Alternator Ground

Work is going to slow down on the car over the next week or so due to family commitments, but I did manage to get a little time on it today.

I moved the grounding tab on the alternator to the lower left bolt so that I could run a short grounding wire over to the block. The alternator came with a pretty long wire that I just cut and crimped a new connector on. This should be out of the way of everything.

2 thoughts on “Alternator Ground

  1. Are you talking about the spacer between the throttle body and the air cleaner base? If so, the spacer is sealed to the air cleaner base with black RTV, so the only o-ring that is necessary is between the spacer and the throttle body.

Leave a Reply to Jason Cancel reply

Your email address will not be published. Required fields are marked *